Well-Fib-PTFE-C Magazine type filter

Model : Well-Fib-PTFE-C Magazine type filter

Q'ty :

Specifications
Features

Filter material specifications
1.Filter material	100% Spunbond Polyester Media With P.T.F.E. Coating
2.Dust type	SiO₂fine dust、Generally irregular shape fine dust
3.Filter material filtration efficiency	99.95%@0.2-2micron
4.Filter size	Shape	filter area		Size
		Ft²	M²
	Horizontal filter	110	10	12.75”OD × 8.38” ID × 26”L
		110	10	13.80”OD × 9.50” ID × 26”L
5.Filter material structure	Horizontal －The upper and lower end covers are fully open, and the material can be galvanized or stainless steel. －The opening degree of the inner metal support lining is 77%, and the material can be galvanized or stainless steel. －The opening degree of the outer metal support lining mesh is 80~90%, and the material can be galvanized or stainless steel. －Synthetic rubber airtight gasket ring, manufactured in one piece
6.Filter material operating temperature	135^oC
7.Filter certification	Passes DIN EN 60335-2-69 test method，M-Class standards after IFA testing

Features of filter material：

Installing an external iron mesh, designed to be used without straps。
Both sides of the filter material surface are coated with P.T.F.E. (Teflon)，For hydrophobic filter media。
Exclusive filter material for cohesive, fibrous and hygroscopic dust。
The wide pleat design can easily filter dust and use high-pressure air pulses to shake off irregular dust that is cohesive, fibrous, and hygroscopic.。
Can handle hygroscopic dust with moisture content below 5%。

This kind of filter material coated with P.T.F.E. and equipped with an outer iron mesh is generally applicable to CVD of TFT-LCD, CVD burner exhaust treatment of SOLAR, and SiO₂fine dust with operating temperature below 135°C.